Save yourself pounds and reset your airbag light yourself.  Simple to use, small and portable can be used time and time again. Don't let Dealers charge you £40+ for a job that takes less than a minute.

Functions

How Audi-VW Airbag Reset Toot works:

All Audi-VW airbag systems after a car crash and airbag deployment are locked. Even after small accident thr Airbag sensor will write a special error message to the internal memory "crash data stored" after you would normally need to exchange the very expensive sensor for new one.

With the Audi-VW Airbag Reset Tool you can reset and repair the airbag sensor at home in less than 1 minute.  No need to remove airbag sensor from the car. Fully automatic sensor type recognizing.

Audi-VW Airbag Reset Tool works through the OBD II port and there is no requirement for any additional computer equipment.  This unit will erase both the crash data and or fault memory.

Workable Models

Works with all VW / Audi airbag sensors to year 2003:

AUDI A4, A6, A8 1994-1997:
Airbag V BOSCH:
8A0 959 655 C (Bosch 0 285 001 038)
8A0 959 655 K (Bosch 0 285 001 155)
8A0 959 655 K (Bosch 0 285 001 151)
Crash data erase & Fault erase

AUDI A3, A4, A6, A8 <1999:
Airbag 7 BOSCH:
4B0 959 655 C
4B0 959 655 J
4D0 959 655 C
4D0 959 655 H
8D0 959 655 C
8D0 959 655 L
8L0 959 655 F
(all Bosch Airbag 7)
Crash data erase & Fault erase

Audi A2, A3, A4, A6, A8 - 1999:
Airbag 8 BOSCH:
Crash data erase & Fault erase (can erase "Controller Malfunction");

VW - Golf III, Passat B4, Sharan:
1J0 909 603 SIEMENS
Crash data erase & Fault erase

VW - Golf IV, Passat B5:
Siemens:
1J0 909 609
1J0 909 607
Crash data erase & Fault erase

VW - Golf IV, Passat B5:
Bosch:
3B0 959 655 B
8L0 959 655 A
Crash data erase & Fault erase

VW - Golf IV, Passat B5, Sharan:
Siemens:
6Q0 909 605 A
6Q0 909 605 B
Crash data erase & Fault erase

VW - Golf IV, Passat B5, Sharan:
Siemens:
1C0 909 605 C
1C0 909 605 F
1C0 909 605 H
6Q0 909 605 C
Crash data erase & Fault erase

VW - Passat B6 2001-2004:
new SIEMENS VW5, VW51, VW61
Crash data erase & Fault erase

Skoda, Seat all SIEMENS
Crash data erase & Fault erase

Now support new Audi airbag sensors 1999-2002 DTC65535 (Controller Malfunction) erase by OBDII
connector. Works with all sensor types:

8L0 959 655 G (Bosch 0 285 001 352) and others with HC12 processor
4D0 959 655 J (Bosch 0 285 001 266)
8D0 959 655 J (Bosch 0 285 001 276)
8D0 959 655 F (Bosch 0 285 001 270)
8D0 959 655 M and others with National CR16 (44 PLCC)

Operation Instructions

Very simple user instruction:

Connect this tool to VW Audi car OBD II connector.  Left Red button is for airbag "crash data" erase. Push this button once and wait: yellow light will start to flash and after 15 seconds the green light illuminates informing you that "crash data" has been erased.  If the Red light illuminates erasing has not been successful. Try again.

The Left Red button is for erasing the airbag "fault memory" or "errors".

When the Yellow button is pressed the airbag light will be extinguished.